微信营销
欢迎关注Tianchang YuanAn machinery co., LTD微信公共帐号
1扫描以上二维码 2加微信号:

Introduction and precautions for liquefied ejector

Author:yajx   Add Time:2012-01-09 16:23:45  

Details

    HYB-G series of new high-pressure steam jet liquefier in the steam pressure ≥ 0.6Mpa under the steam pressure, jet liquefaction process can form high-intensity micro-turbulence, starch dispersion effect, liquefaction thoroughly. At the same time the feed pump head requirements are low, less energy consumption. Saccharification liquid high purity, no insoluble starch particles, protein coagulation effect is good, and starch and protein separation effect is also good. By jet liquefaction, the protein is clearly gathered together, floating on the surface, the sugar filter speed greatly accelerated. Elimination of the gap liquefaction due to uneven heating of the material caused by the end of the saccharification of the phenomenon of the existence of the phenomenon, the protein is difficult to coagulation, sugar filter difficult, and protein class, and fine class mixed with sugar, resulting in fermentation bubble Increase, flushing fluid serious, the impact of the process after the extraction rate and quality of refined liquid production conditions. Jet liquefaction continuous, no clogging. HYB-G high-pressure steam jet liquefier from the structural principle to completely eliminate the clogging phenomenon. In the case where there is a whole grain or starch concentration of ≥ 22Be in the slurry, it is impossible to cause clogging. From the use of each manufacturer, the spray liquefier within 2 years is not required to be cleaned and cleaned. Eliminating the past domestic jet liquefier due to nozzle diameter and other reasons, especially with superheated steam injection, often clogging and can not produce defects. The HYB-G high-pressure steam jet liquefier is carried out in the form of a steam bale, driven by high-pressure steam, driven by high-pressure steam to make the liquefaction more uniform and more fully, and due to the low demand for the feed pump Consumption, so that production costs once again reduced.

    Self-controlled high-pressure steam jet liquefier is a complex thermal conductivity equipment, in a variety of operating environment to ensure long-term normal operation, heating precision, fast, stable, easy to operate, the use of manufacturers can choose according to the needs of Europe and the United States imports of pneumatic film actuator, Pneumatic film actuator for automatic control.

    According to the long-term market survey, due to cassava and other raw materials, large sediment concentration and serious wear and tear, production equipment, the use of a shorter life, I plant specifically designed to develop high-quality wear a full range of high-pressure steam jet liquefier models, Quality of the alloy, which fundamentally solve the problem of wear and tear to extend the service life, welcomed the use of manufacturers targeted selection.

    Precautions for use of the product

    Jet the vapor inlet of the liquefier, and the liquid inlet should be fitted with a check valve. 2, spray the liquefier of the steam chamber, liquid room to be installed 0-1Mpa pressure gauge. Install the 0-150 ° C electronic thermometer on the thermometer interface. 3, in order to avoid the jet of liquefier nozzle is covered with rope, debris and other clogging, should be installed in the pulp tank when the addition of waste residue baskets (screen 14 mesh -16 mesh / inch). 4, starch milk feed pump with working pressure greater than 0.4Mpa high temperature thick slurry pump. 5, the device is suitable for 30-40% concentration of starch milk. According to the process requirements to adjust the PH value, add the required enzyme preparation. 6, adjust the steam valve and feed valve, so that the liquefaction of the export temperature to meet the technical requirements. 7, after the end of ejection liquefaction rinse the applicator, keep it clean.


Related Content

  • 09

    2012-01

    Introduction and pre…

    Details ​HYB-G series of new high-pressure steam jet liquefier in the steam pressure ≥ 0.6Mpa under the steam pressure, jet liquefactio…… [Know More]